zuloocash.blogg.se

1. VISCOSITY OF BEHR PREMIUM ULTRA PLUS PAINNT SKIN
2. VISCOSITY OF BEHR PREMIUM ULTRA PLUS PAINNT WINDOWS

VISCOSITY OF BEHR PREMIUM ULTRA PLUS PAINNT WINDOWS

To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING.

VISCOSITY OF BEHR PREMIUM ULTRA PLUS PAINNT SKIN

AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. Contact the National Lead Information Center at 1-800-424-LEAD or log on to WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. WARNING! If you scrape, sand or remove old paint, you may release lead dust. Visit for painting tips, expert project advice and the perfect color coordination with the ColorSmart by BEHR® Tool. DISPOSAL For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service. After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Cooler temperatures or higher humidity may prolong drying time. Darker colors may require additional dry time between coats. Certain colors may require additional coats for complete hide. Do not thin if using a roller or brush however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon. Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015. Intermix containers of same product to ensure color and sheen uniformity. APPLICATION Apply when air and surface temperatures are between 50-90☏ (10-32☌). To consult with a Behr Certified Coatings Professional, call 1-80 Ext. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. If this product is found not to perform as specified upon inspection by our representative during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. *LIFETIME LIMITED WARRANTY Behr Process Corporation warrants to the original residential consumer purchaser the performance of this product as described on this label for so long as you reside in your home. For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR PREMIUM PLUS ULTRA Paint if needed. If bleeding continues, a longer dry time is needed before topcoating. If the stain bleeds through, spot prime another coat to the stained area and test again before topcoating. For heavy stains, test for stain bleed-through by applying BEHR PREMIUM PLUS ULTRA Paint to a small section. Lock in stains with BEHR PREMIUM PLUS ULTRA Paint as a spot primer.

Use BEHR PREMIUM PLUS ULTRA® Paint as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.

Allow new stucco, plaster and masonry to cure for 30 days before painting. Remove all dust with a damp cloth, allow to dry. Scuff sand glossy surfaces and repair imperfections. Remove mildew stains with a mildew stain remover. Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry. PREPARATION & PRIME All surfaces should be properly prepared and cleaned. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings. WHERE TO USE Properly prepared coated and uncoated Interior surfaces. 1754 Medium Base Protect from Freezing FOR TINT BASES – DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANTS The extra protective shell, featuring NANOGUARD® Technology, offers a STAYS LOOKING NEW LONGER® Finish for excellent durability. Low VOC, 100% Acrylic Soap & Water Clean-Up No.Stain & Scuff Resistant 1 Hr Dry Time 2 Hr Recoat Time.Excellent Durability & Hide in Fewer Coats.